Tinstraat 107-115
2984 AN Ridderkerk
The Netherlands
Phone + 31 180 420 055
Fax +31 180 499 810
Email info@nedmarine.com
English
flag_language
 
Search
 
Hatch Sealing Tapes
Dry Cargo hatch sealing tape
 
Dry Cargo is self-adhesive and provides excellent strength and flexibility for all-weather operations.
 
Ned Marine services B.V. is national agent and distrubitor of Dry Cargo tape for the Netherlands.
 
According to rules and regulations, metal hatch covers on cargo vessels are expected to be water-tight without the aid of further appliances. In practice hatch joints can leak for a number of reasons with resulting cargo damage.
 
As a safeguard and as an exercise in good housekeeping, many shipowners around the world carry hatch sealing tape on their ships.
 
Dry Cargo is an internationally recognised and accepted heavy-duty, all-wheather hatch sealing tape with proven results since its introduction in the early 1970s. It consists of 20 metre rolls of bitumen compound coated onto polythene film and interleaved with release paper.
 
Product data
 
Temperature range:      

Application:             From 5° C to 35° C
Service:                   From -5° C to 65° C 
   
Packing:             

75mm/3" width        4 x 20 mtr rolls per ctn
100mm/4" width      3 x 20 mtr rolls per ctn
150mm/6" width      2 x 20 mtr rolls per ctn    

Carton Spec:      

(All widths) 20 kg   320 x 320 x 320 cms
All Leak Stop - Pipe & Hose Repair Kit
 
All Leak Stop is an industrial strenght pipe and hose repair kit based on water-activated fiberglass tape. It is applicable on many different materials an sets like steel in minutes. Even under water, fresh or salt!
 
Permanent repairs in minutes!
 
o Copper
o Galvanized
o Rubber
o Fiberglass
o PVC Pipe
o Plastics
o Other metals
 
Some of the main advantages of All Leak Stop tape:
 
o No tools requiered, just add water
o Withstands temparatures up to 900 degr. F, and pressures up to 300 PSI
o Approved by EPA standards for use on potable water lines
o Usable on water lines, fuel lines, compressed air or hydraulic lines      
Canseal-R Roll Type marine Tape
 
CanSeal-R is the premium quality roll type marine tape recommended for moderate weather conditions.
 
CanSeal-R is available in two widths and combines quality and convenience at a very economical price.
 
Specifications:
 
o Heavy duty hatch cover tape in rolls
o High tack adhesive mastic with silver backing  
 
ISSA code Width Length Rolls/carton Total length/carton
23 24 52 100 mm (4") 20 m (66') 3 60m (198')
23 24 53 150 mm (6") 20 m (66') 2 40m (132')
 
Application Instructions
 
1.   Surface must be clean and dry
2.   Remove loose rust and old tape
3.   A thin layer of old CanSeal tape can be used as a base for the new application
4.   Remove paper backing from CanSeal roll and press into place, covering hatch joint
5.   Step firmly on the full length of tape

Note: In cold weather conditions it is advisable to heat the hatch surface and adhesive side of tape before application
Canseal Marine Tape
 
CanSeal is the heavy duty hatch sealing tape manufactured in Canada with extraordinary strength, adhesion and flexibility.
 
At 5.0 mm thick and reinforced with specially treated fiberglass mesh, CanSeal Marine Tape ensures that your cargo will arrive damage free.  


 
Specifications:
 
o Heavy duty hatch cover tape in strips
o High tack adhesive mastic with fiberglass mesh
   reinforcement and
   polyethylene over
o Modern polymer modification process flexibility
o Extreme high and low end temperature performance  

 
ISSA code Width Length Rolls/carton Total length/carton
23 24 62 110 mm (4.3") 1.22 m (48') 30 36m (120')
23 24 63 150 mm (6.0") 1.22 m (48') 30 36m (120')
 
Application Instructions
 
1.   Surface must be clean and dry
2.   Remove loose rust and old tape
3.   A thin layer of old CanSeal tape can be used as a base for the new application
4.   Remove paper backing from CanSeal strip and press into place, covering hatch joint
5.   Step firmly on the full length of tape
 

Note: In cold weather conditions it is advisable to heat the hatch surface and adhesive side of tape before application  
Please contact us at info@nedmarine.com if you require any more information