May 13, 2026

Ned Marine launches flying drone and subsea ROV inspection services for Non-Destructive Testing

Dutch Non-Destructive Testing specialists Ned Marine expands its inspection capabilities with the introduction of NDT drone services. Operating both drones and ROVs, the new service enables faster, safer and more efficient inspections of vessels, offshore installations and industrial assets – both above and below water, and including confined spaces.

With this move, Ned Marine strengthens its position as a full-service inspection provider, combining traditional NDT techniques with advanced remote inspection technologies. Ned Marine already inspects vessels globally. The new service is aimed at surveys for Dutch and wider European customers.

Read more below the photo or discover the benefits of drone and ROV inspection here »

Faster inspections, less downtime

Drone-based inspections allow Ned Marine to carry out visual inspections and thickness measurements (UTM) in areas that are difficult to access using conventional methods such as scaffolding, rope access or diving operations.

Typical applications include:

  • Confined spaces on board vessels (such as ballast tanks and cargo holds)
  • Offshore and onshore wind turbines
  • Tank storage facilities
  • Industrial structures and installations

By eliminating the need for extensive access equipment and reducing human exposure to hazardous environments, these ‘flying inspections’ can be completed significantly faster, often within hours instead of days. This minimizes operational downtime, which is especially relevant for seagoing container vessels and tankers.

Indeed, inspection times can be reduced by up to four times, while overall costs can be significantly lower compared to traditional methods.

Subsea inspections up to 300 metres

In addition to its aerial services, Ned Marine now offers subsea Non-Destructive Testing inspections using remotely operated vehicles (ROVs), capable of operating at water depths of up to 300 metres.

The technology serves as a practical and cost-efficient alternative to traditional diving operations.  The ROVs provide high-definition live video streams and detailed inspection data, supporting:

  • Hull inspections
  • Cathodic protection assessments
  • Structural condition monitoring
  • Pre-docking surveys

“We are very proud to launch this new service!”, says Leo Zwagemaker, Commercial Manager at Ned Marine. “By integrating arial drone and ROV technology into our NDT services, we can allow our clients to further reduce downtime and make better-informed maintenance decisions. The fact that our inspectors can now also work remotely, with real-time data accessible worldwide, also adds value: this method improves decision-making and facilitates a more seamless collaboration between vessel operators, surveyors and technical teams.”

Integrated NDT approach

The new drone and ROV services are fully integrated into Ned Marine’s existing NDT offering, which includes Visual Testing (VT), Ultrasonic Thickness Measurements (UTM) and detailed inspection reporting. By combining visual data, measurement results and digital analysis, clients gain a complete and reliable overview of asset condition, enabling better maintenance planning and reducing the risk of unexpected failures.

October 29, 2025

Maritime NDT Services, in Dock and at Sea

Non-destructive testing (NDT) finds cracks, corrosion and other defects in hulls, welds and steel structures without damaging them. Since 2010, NDT has been one of our core specialisms. We test 24/7, worldwide: on land, in dock and at sea, for ship owners, shipyards, offshore operators and industry.

Our experienced technicians and engineers support class surveys, repair inspections and condition assessments. Ned Marine is approved by the major classification societies, including DNV and Bureau Veritas for NDT and ultrasonic thickness measurements, and is ISO 9001 and SCC (VCA) certified.

Vessel in port soon? Call +31 180 420 055 | info@nedmarine.com | Contact form

Our NDT Methods

Not sure which method you need? Describe the problem or send the surveyor’s instructions. We’ll advise.

Inspections and Surveys

Besides NDT, our inspectors carry out inspections and surveys, including Special Surveys and pre-condition surveys to find cracks, buckling and significant corrosion:

  • Hatch Tightness Testing
  • New Building Inspections
  • Coating Inspections
  • Pre Conditional Surveys (pre-vetting inspections)
  • Hull Condition Monitoring
  • Superintendency

Where We Test

  • In port or at the shipyard: hull, weld and machinery inspections during a port call or repair period.
  • In dry dock: surveys and measurements while the vessel is docked.
  • At sea: testing on board during the voyage.
  • Offshore and onshore: platforms, wind farms, storage tanks and industrial installations.

Our headquarters is in Ridderkerk, close to the port of Rotterdam, and our inspectors work worldwide.

Class Surveys and Reporting

For class-related work, tell us the classification society, survey type and the surveyor’s instructions. We match the method, the inspector and the report to the society’s requirements before we start. Our reports cover the locations examined, the method, the measurements and findings, with photos or sketches where useful. See our certificates and approvals.

Remote NDT with Drones and ROVs

Tanks without scaffolding, hulls without divers: our drones and ROVs carry out visual inspections and ultrasonic thickness measurements in hard-to-reach places, up to four times faster than traditional methods. See drone and ROV inspection.

What Does NDT Cost?

The price depends on the method, the number of components or measuring points, access, travel and the report you need. A work list, photos or class instructions help us quote quickly and accurately.

NDT Training Centre

Looking for NDT courses rather than an inspection? Visit our NDT Training Centre.

What to Send to Book

  • Vessel or installation: name and type
  • What needs testing: hull, welds, tanks, machinery or a suspected defect (no need to know the method)
  • Where: port, yard, dry dock, at sea or offshore
  • When: preferred date, port call or survey deadline

Class society, work list, drawings or earlier reports are welcome but not required for a first request.

Request an NDT quotation: +31 180 420 055 | info@nedmarine.com | Contact form

One Partner on Board

While our inspectors are on board, we can also inspect and replace sacrificial anodes and check your pilot ladders and gangways. One supplier, one point of contact.