NoSpray Protection System is a type approved aluminum/glass cloth jacketing system designed to prevent the flammable spray of hot oil which can come in contact with hot surfaces thus causing fires in vessel engine rooms. NoSpray is available in tape or sheet format and is coated on one side with a silicone adhesive for ease of installation and superior adhesion.
Applications
- Fuel oil injection pipes, fuel oil service pipes, fuel oil valve cooling oil pipes attached to diesel engines
- Lube oil service pipes and hydraulic oil pipes attached to diesel engines
- Flammable oil pipes
- Flammable oil pump and strainer
- Fuel oil heater
- Lube oil heater and cooler
- Fuel oil purifier – Lube oil purifier
- Fuel oil burning unit for boiler, thermal oil heater, inert gas generator and incinerator
- Level gauge, fittings and oil tray of flammable oil tank
The preceding areas of fire risk should be protected from the following sources of ignition:
- Exhaust gas pipe
- Steam pipe
- Turbo charger
- Electrical equipment
- Boiler, thermal oil heater, incinerator
- Welding spatter, cigarettes, etc.
- Meets SOLAS Regulation II 2/15.2.11
- Fire Tested in accordance with IMO Resolution A.653 (16)
| IMPA | Width | Rolls/Box |
| 87 18 01 | 35 mm | 28 |
| 87 18 02 | 50 mm | 20 |
| 87 18 08 | 75 mm | 12 |
| 87 18 03 | 140 mm | 7 |
| 87 18 07 | 250 mm | 4 |
| 87 18 05 | 500 mm | 2 |
| 87 18 06 | 1000 mm | 1 |
| Specifications | |
| Format x 10 Meters | 50 mm 35 mm 75 mm |
| 500 mm 1000mm 250 mm | |
| Total Thickness | 9.5 ml |
| Colour | Silver |
| Temp. Range | up to 150° C (300 F) |
| Pressure | 300 psi |
| Tensile Strenght | 93.2 lbs. per inch (ASTM-882) |
| Adhesion to Steel | 5.8 lbs. per inch (ASTM-33330) |
| Aging Properties | Indefinite shelf life when properly stored |
| Ideal Storage Conditions | 70° F at 50% relative humidity |
